YASKAWA MOTOMAN-PH130F - Page 94

9 Cable Wiring
9.1 Disassembly and Reassembly of Internal Wiring Harness
9-5
HW1485471
HW1485471
3. L-Arm
• Refer to table 9-3 “Internal Wiring Harness Parts Checklist (L-Arm)”
and fig. 9-3 “Disassembly and Reassembly of the Internal Wiring
Harness (L-Arm)” .
1. Unscrew the hexagon socket head cap screws and remove the
plate .
2. Unscrew the hexagon socket head cap screws and then remove
the saddles .
3. Cut off cable ties .
Table 9-3: Internal Wiring Harness Parts Checklist (L-Arm)
No. Item Qty. Note
Plate HW0403915-1 1
Hexagon socket head cap screw
M5 (length: 12 mm) *trivalent
chromate*
Conical spring washer 2H-5
*trivalent chromate*
2 each Tightening torque 6 N•m
Saddle CD36 2
Hexagon socket head cap screw
M6 (length: 16 mm) *trivalent
chromate*
Conical spring washer 2H-6
*trivalent chromate*
Washer M6 *stainless*
2 screws
(2 places)
Tightening torque 10 N•m
Cable tie T120R-HSW 2
2
1
4
3
5
1
2
3
4
5
94/134