YASKAWA SGDS Sigma III Series - Digits with Allocated Functions in Parameter

7.1 Outline
7-3
7.1.3 Digits with Allocated Functions in Parameter
The parameters written as PnXXX.Y are called digit-set parameters. For these parameters, the “Y” indicates the
location of the bit where the setting is made to select a function. The position of each digit in hexadecimal code
is shown below.
Each hexadecimal digit is four-bit long. Set “Y” to a hexadecimal value ranging from 0 to F.
PnXXX=H
PnXXX.0
PnXXX.1
PnXXX.2
PnXXX.3