YASKAWA SGDS Sigma III Series - Page 41

2 System Selection
2.4.1 Cables for SGMAH and SGMPH Servomotors
2-10
• Use the table below to select pre-wired cables for your SGMPH Sigma II servomotor.
* The “(A)” at the end of the cable part number is the revision level. Revision level may be
changed prior to catalog reprinting.
** Standard cable lengths are Stock items; non-standard cable lengths are Limited Stock
items.
Cable Description (C)
Motor Size
(kW)
Part Number* Comments
Item
Class
Power Cable with
Interconnectron Connectors
(without Brake)
0.1, 0.2,
0.4, 0.8
B4ICE-(A)
These UL and CE
compliant cables are
available in five lengths.
Use two digits in the part
number’s last place:
03: 3m
05: 5m
10: 10m (standard)
15: 15m
20: 20m
Stock**
1.5
B5ICE-(A)
Power Cable with
Interconnectron Connectors
(with Brake)
(IP67)
0.1, 0.2,
0.4, 0.8
B4IBCE-(A)
1.5
B5IBCE-(A)
Encoder Cable with
Interconnectron Connector
(incremental or absolute)
(IP67)
All
A1ICE-(A)
Encoder Cable
(for applications
up to 20m)
Only for Solder
Connections
FR-RMCT-SB
These cables are available
in any length.
For example, to order one
FR-RMCT-SB cable, 16m
long,
specify:
quantity: 16
part no.: FR-RMCT-SB
Encoder Cable
(for applications
from >20 to <50m)
Only for Solder
Connections
UL20276-SB
Input/Output 1m 1CN Cable
with Pigtail Leads
DE9411355