Customizing Your Phone
23
1) Enter the start time in the Start Date field.
2) Enter the end time in the End Date field.
Value format is: Month/ Day of Week/ Day of Week Last in Month/ Hour of
Day.
The mapping is:
For Month: 1=Jan, 2=Feb,…, 12=Dec;
For Day of Week: 1=Jan, 2=Feb,…, 12=Dec;
For Day of Week Last in Month: 1=the first week in a month,…, 5=the last
week in a month;
For Hour of Day: 0=0am, 1=1am,…, 23=11pm.
3) Enter the desired offset time in the Offset (minutes) field.
7. Click Save changes to accept the change.
8. Perform auto provisioning on the phone to download above configurations. For more
information on how to perform auto provisioning, refer to Downloading Configuration
Files on page 11.
Note
To configure the time and date format via CommPortal phone configurator:
1. Click on Preferences->Time&Date.
2. Mark the desired radio box of the Time Format field.
Please refer to Appendix A - Time Zones for the list of available time zones on the IP phone.
To Next Page
Loading...
