Basic Call Features
75
To use call completion:
When the called party is busy, the following prompt will appear on the LCD screen of the
phone:
1. Press the OK soft key, the phone returns to the idle screen and call completion is
activated.
When the called party becomes idle, the following prompt will appear on the LCD
screen of the phone:
1. Press the OK soft key to redial the number.
Note
You can press a recall key to place a call back to the last incoming call.
To configure a recall key via web user interface:
1. Click on DSSKey->Programable Key.
2. Select the desired programable key.
Call completion is not available on all servers. For more information, contact your system
administrator.
To Next Page
Loading...
Need help?
General