User Guide for the SIP-T19(P) E2 IP Phone
28
To change the phone unlock PIN via phone user interface:
1. Press Menu->Settings->Basic Settings->Change PIN.
2. Enter the desired value in the Current PIN, New PIN and Confirm PIN field
respectively.
3. Press the Save soft key to accept the change or the Back soft key to cancel.
Note
To deactivate the phone lock via phone user interface:
1. Press Menu->Settings->Advanced Settings (default password: admin) ->Phone
Lock.
2. Press or , or the Switch soft key to select Disabled from Lock Enable field.
3. Press the Save soft key to accept the change.
Phone lock is configurable via web user interface at the path Features->Phone Lock.
You can press the Volume key to adjust the ringer volume when the phone is idle or
ringing. You can also press the Volume key to adjust the receiver volume of currently
engaged audio devices (handset, speakerphone or headset) when the phone is in use.
The unlock PIN length must be within 15 digits.
To Next Page
Loading...
Need help?
General