User Guide for the SIP-T19(P) E2 IP Phone
26
You can lock your phone temporarily when you are not using it. This feature helps to
protect your phone from unauthorized use.
Phone lock consists of the following:
Menu Key: The Menu soft key is locked. You cannot access the menu of the
phone until unlocked.
Function Keys: The function keys are locked. You cannot use the Message, RD,
Mute, Transfer, , navigation keys and soft keys until
unlocked.
All Keys: All keys are locked except the Volume key, digit keys, # key, * key
and Speakerphone key. You are only allowed to dial emergency
numbers, reject incoming calls by pressing the Reject soft key,
answer incoming calls by lifting the handset, pressing the
Speakerphone key, the HEADSET key, the key, or the Answer
soft key, and end the call by hanging up the handset, pressing
the Speakerphone key or the EndCall soft key.
Note
To activate the phone lock via phone user interface:
1. Press Menu->Settings->Advanced Settings (default password: admin) ->Phone
Lock.
2. Press or , or the Switch soft key to select Enabled from the Lock Enable
field.
3. Press or , or the Switch soft key to select the desired type from the Lock
Type field.
The emergency number setting, if desired, must be set before lock activation. For more
information, refer to Emergency Number on page 63.
To Next Page
Loading...
Need help?
General