Customizing Your Phone
25
The Advanced Settings option is only accessible to the administrator. The default
administrator password is ―admin‖. For security reasons, you should change the default
administrator password as soon as possible.
To change the administrator password via phone user interface:
1. Press Menu->Settings->Advanced Settings (default password: admin) ->Set
Password.
2. Enter the current password in the Current PWD field.
3. Enter the new password in the New PWD field.
4. Re-enter the new password in the Confirm PWD field.
5. Press the Save soft key to accept the change or the Back soft key to cancel.
Administrator password is configurable via web user interface at the path
Security->Password.
You can set the ―#‖ key or ―*‖ key to perform as a send key while dialing.
To configure key as send via phone user interface:
1. Press Menu->Features->Key as send.
2. Press or , or the Switch soft key to select # or * from the Key as send field,
or select Disabled to disable this feature.
3. Press the Save soft key to accept the change or the Back soft key to cancel.
Key as send is configurable via web user interface at the path Features->General
Information.
To Next Page
Loading...
Need help?
General