Basic Call Features
87
successfully, there is a voice prompt confirming that the call was parked. You can
retrieve the parked call by pressing the Retrieve soft key. If the parked call is not
retrieved within a period of time defined by the system, the phone performing call park
will receive a call back.
Note
The IP phone supports call park feature under the following modes:
FAC mode (dial the call park code to park the call to local extension or a desired
extension)
Transfer mode (park the call to directional parking lot directly)
You may need to configure the call park code/call park number or park retrieve
code/park retrieval number before using call park feature.
Note
To configure call park feature in FAC mode via web user interface:
1. Click on Features->Call Pickup.
2. Select FAC from the pull-down list of Call Park Mode.
3. Select Enabled from the pull-down list of Call Park.
If Enabled is selected, the Park soft key will display on the LCD screen during a call,
and the Retrieve soft key will display on the dialing screen.
4. (Optional.) Enter the call park code in the Call Park Code field.
It is configured for the Park soft key.
5. (Optional.) Enter the park retrieve code in the Park Retrieve Code field.
Call park is not available on all servers. Contact your system administrator for more
information.
The call park code/call park number and park retrieve code/park retrieval number are
predefined on the system server. Contact your system administrator for more
To Next Page
Loading...
Need help?
General