User Guide for the SIP-T19(P) E2 IP Phone
88
It is configured for the Retrieve soft key.
6. Click Confirm to accept the change.
Note
To park a call in FAC mode:
1. During a call, press the Park soft key (You may need to press the More soft key to
see the Park soft key).
- If the call park code is not configured, you need to enter the call park code.
Press , or the Park soft key.
- If the call park code is configured, the phone will dial the configured call park
code shown as below:
2. Do one of the following:
a) If you want to park the call against the local extension.
If the Park or Retrieve soft key doesn’t appear on the LCD screen, please select
Disabled from the pull-down list of Custom Softkey via web user interface at path
Settings->Softkey Layout.
To Next Page
Loading...
