Basic Call Features
95
some services, but don’t want to be harassed. Anonymous call is configurable on a
per-line basis. You can also configure the phone to send anonymous call on/off code to
the server to activate/deactivate anonymous call on the server side.
Note
To configure anonymous call via phone user interface:
1. Press Menu->Features->Anonymous Call.
2. Press or , or the Switch soft key to select Enabled from the Local
Anonymous field.
3. (Optional.) Press or to select the desired value from the Send Anony
Code field.
The phone will send the configured on code or off code depending on your
selection when you enable or disable anonymous call feature on the phone.
4. (Optional.) Enter the anonymous call on code in the On Code field.
5. (Optional.) Enter the anonymous call off code in the Off Code field.
6. Press the Save soft key to accept the change or the Back soft key to cancel.
Anonymous call is configurable via web user interface at the path Account->Basic.
To place an anonymous call:
1. Using the specific line on the phone to place a call to phone B.
The LCD screen of phone B prompts an incoming call from anonymity.
You can use anonymous call rejection to reject incoming calls from anonymous callers.
Anonymous call rejection automatically rejects incoming calls from callers who
Anonymous call is not available on all servers. Contact your system administrator for the
anonymous call on code and off code.
To Next Page
Loading...
Need help?
General