User Guide for the SIP-T19(P) E2 IP Phone
96
deliberately block their identities and numbers from being displayed. Anonymous call
rejection is configurable on a per-line basis. You can also configure the phone to send
anonymous call rejection on/off code to the server to activate/deactivate anonymous
call rejection on the server side.
To configure anonymous call rejection via phone user interface:
1. Press Menu->Features->Anonymous Call.
2. Press or to scroll to the Anonymous Rejection field.
3. Press or , or the Switch soft key to select Enabled from the Anonymous
Rejection field.
4. (Optional.) Press or , or the Switch soft key to select the desired value
from the Send Rejection Code field.
The phone will send the configured reject on code or reject off code depending on
your selection when you enable or disable anonymous call rejection feature on the
phone.
5. (Optional.) Enter the anonymous call rejection on code in the Reject On Code field.
6. (Optional.) Enter the anonymous call rejection off code in the Reject Off Code field.
7. Press the Save soft key to accept the change or the Back soft key to cancel.
Anonymous call rejection is configurable via web user interface at the path
Account->Basic.
To Next Page
Loading...
Need help?
General