Customizing Your Phone
57
Dependencies:
Type (Directory)
Label (key label displayed on the LCD screen)
Usage: Press the programable key to immediately access to frequently used lists.
You can only register one account on the SIP-T19(P) E2 IP phone.
To register an account via phone user interface:
1. Press Menu->Settings->Advanced Settings (default password: admin)
->Accounts.
2. Press the Enter soft key.
3. Press or , or the Switch soft key to select Enabled from the Active Line
field.
4. Enter the desired value in Label, Display Name, Register Name, User Name,
Password and SIP Server1/2 field respectively. Contact your system administrator
for more information.
5. If you use the outbound proxy servers, do the following:
1) Press or , or the Switch soft key to select Enabled from the Outbound
Status field.
2) Enter the desired value in the Outbound Proxy1/2 and Proxy Fallback Interval
field respectively. Contact your system administrator for more information.
6. Press the Save soft key to accept the change or the Back soft key to cancel.
To disable an account via phone user interface:
1. Press Menu->Settings->Advanced Settings (default password: admin)
->Accounts.
2. Press or , or the Switch soft key to select Disabled from the Active Line
field.
3. Press the Save soft key to accept the change or the Back soft key to cancel.
Account registration is configurable via web user interface at the path
Account->Register.
To Next Page
Loading...
Need help?
General