User Guide for the SIP-T19(P) E2 IP Phone
76
3. Select ReCall from the pull-down list of Type.
4. Click Confirm to accept the change.
Note
You can mute the microphone of the active audio device during an active call so that
the other party cannot hear you. Call mute applies to all modes (Handset, Headset and
Speakerphone).
To mute a call:
1. Press during an active call.
The LCD screen indicates that the call is now muted.
To un-mute a call:
1. Press again to un-mute the call.
You can place an active call on hold. Only one active call can be in progress at any time.
Other calls can be made and received while placing the original call on hold. When you
A recall key is configurable via web user interface only.
To Next Page
Loading...
