Basic Call Features
77
place a call on hold, your IP PBX may play music to the other party while waiting.
To place a call on hold:
1. Press the Hold soft key during a call.
The LCD screen indicates that the call is on hold.
Note
To resume a held call:
1. Press the Resume soft key.
Multiple Calls on Hold:
If multiple calls are placed on hold:
1. Press or to switch between the calls, and then press the Resume soft key
to retrieve the desired call.
If more than one call is placed on hold, a numbered prompt appears on the LCD screen,
for example ―1/2‖, indicating that this is the first call out of two calls.
You can use DND to reject incoming calls automatically on the phone. The prompt
message "n New Missed Call(s)" ("n" indicates the number of missed calls) will appear
on the LCD screen, and callers will receive a busy message. All calls you receive while
DND is enabled are logged to your missed calls list.
Note
To activate DND via phone user interface:
1. Press the DND soft key when the phone is idle.
The icon on the status bar indicates that DND is enabled.
The phone will beep softly every 30 seconds to remind you that you still have a call on
hold.
The prompt message will display only if Missed Call Log is enabled. Missed call log is
configurable via web user interface at the path Account->Basic->Miss Call Log.
Do not disturb is local to the phone, and may be overridden by the server settings. For
more information, contact your system administrator.
To Next Page
Loading...
Need help?
General