Customizing Your Phone
27
4. (Optional.) Enter the desired interval of automatic phone lock in the Lock Time Out
field.
The default timeout is 0. It means the phone will not be automatically locked. You
need to long press to lock it immediately when the phone is idle.
If it is set to other values except 0 (e.g., 5), the phone will be locked when the phone
is inactive in idle screen for the designated time (in seconds).
5. Press the Save soft key to accept the change.
When the phone is locked, the LCD screen prompts ―Phone locked.‖ and displays
the icon .
To unlock the phone, you must know the phone unlock PIN. The default phone unlock PIN
is ―123‖.
To unlock the phone via phone user interface:
1. Press any locked key, the LCD screen prompts ―Unlock PIN‖.
2. Enter the PIN in the Unlock PIN field.
3. Press the OK soft key to unlock the phone.
The icon disappears from the LCD screen.
You can long press or wait for a period of time (if configured) to lock the
phone again.
Note
You can also unlock the phone by administrator password. When you enter the
administrator password to unlock the phone, the phone will turn to the Change PIN
To Next Page
Loading...
Need help?
General