Yealink SIP-T21 E2

Configuring Advanced Features
647
Parameters
Permitted Values
Default
0-Disabled
1-Enabled
X ranges from 1 to 16 (for SIP-T54S/T48G/T48S/T46G/T46S/T29G)
X ranges from 1 to 12 (for SIP-T52S/T42G/T42S)
X ranges from 1 to 6 (for SIP-T41P/T41S/T27P/T27G)
X ranges from 1 to 3 (for SIP-T40P/T40G/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2/CP860/CP920)
Web User Interface:
None
Phone User Interface:
None
account.X.acd.available
0 or 1
0
Description:
Enables or disables the IP phone to display the Available/Avail or Unavailable/Unavail
soft key for account X after the IP phone logs into the ACD system.
0-Disabled
1-Enabled
X ranges from 1 to 16 (for SIP-T54S/T48G/T48S/T46G/T46S/T29G)
X ranges from 1 to 12 (for SIP-T52S/T42G/T42S)
X ranges from 1 to 6 (for SIP-T41P/T41S/T27P/T27G)
X ranges from 1 to 3 (for SIP-T40P/T40G/T23P/T23G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
X is equal to 1 (for SIP-T19(P) E2/CP860/CP920)
Note: It works only if the value of the parameter “account.X.acd.enable” is set to 1
(Enabled).
Web User Interface:
None
Phone User Interface:
None
account.X.subscribe_acd_expires
Integer from 120 to
3600
3600
Description: