Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
118
To configure the network conference via web user interface:
1. Click on Account.
2. Select the desired account from the pull-down list of Account.
3. Click on Advanced.
4. Select Network Conference from the pull-down list of Conference Type.
5. Enter the conference URI in the Conference URI field.
6. Click Confirm to accept the change.
For a conference call, all parties drop the call when the conference initiator drops the
conference call. For local conference, transfer on conference hang up allows the other
two parties to remain connected when the conference initiator drops the conference
call.
Procedure
Transfer on conference hang up can be configured using the configuration files or
locally.
Configure the transfer on
conference hang up.
For more information, refer to
Transfer on Conference Hang Up
on page 338.
To Next Page
Loading...
Need help?
General