Configure the transfer on
conference hang up.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-transfer&q=load
To configure Transfer on Conference Hang up via web user interface:
1. Click on Features->Transfer.
2. Select the desired value from the pull-down list of Transfer on Conference Hang up.
3. Click Confirm to accept the change.
Directed call pickup is used for picking up an incoming call on a specific extension. A
user can pick up the incoming call using a directed pickup key or the DPickup soft key
(not applicable to SIP-T20P IP phones). This feature depends on support from a SIP server.
For many SIP servers, directed call pickup requires a directed pickup code, which can
be configured on a phone or a per-line basis.
Note
Procedure
Directed call pickup can be configured using the configuration files or locally.
It is recommended not to configure the directed call pickup key and the DPickup soft key
simultaneously. If you do, the directed call pickup key will not be used correctly.
To Next Page
Loading...
Need help?
General