Yealink SIP-T2XP - Page 136

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
120
Configure directed call pickup
feature on a phone basis.
For more information, refer to
Directed Call Pickup on page
338.
<y0000000000xx>.cfg
Assign a directed call pickup
key.
For more information, refer to
Directed Call Pickup Key on
page 421.
Local
Web User Interface
Assign a directed call pickup
key.
Navigate to:
http://<phoneIPAddress>/servl
et?p=dsskey&q=load&model=
0
Configure directed call pickup
feature on a phone basis.
Navigate to:
http://<phoneIPAddress>/servl
et?p=features-callpickup&q=lo
ad
Configure directed call pickup
code on a per-line basis.
Navigate to:
http://<phoneIPAddress>/servl
et?p=account-adv&q=load&ac
c=0
Phone User Interface
Assign a directed call pickup
key.
To configure a directed call pickup key via web user interface:
1. Click on DSSKey->Memory Key (Line Key or Programable Key).
SIP-T19P IP phones only support programable keys and SIP-T22P/T21P/T20P IP phones
only support line keys and programable keys.
2. In the desired DSS key field, select Directed Pickup from the pull-down list of Type.
3. Enter the directed call pickup code followed by the specific extension in the Value
field.