Yealink SIP-T2XP

Configuring Basic Features
127
4. Select the desired value from the pull-down list of Dialog Info Call Pickup.
5. Click Confirm to accept the change.
Call return, also known as last call return, allows users to place a call back to the last
caller. Call return is implemented on IP phones using a call return key.
Procedure
Call return key can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Assign a call return key.
For more information, refer to Call
Return Key on page 425.
Local
Web User Interface
Assign a call return key.
Navigate to:
http://<phoneIPAddress>/servlet
?p=dsskey&q=load&model=0
Phone User Interface
Assign a call return key.
To configure a call return key via web user interface:
1. Click on DSSKey->Memory Key (Line Key or Programable Key).
SIP-T19P IP phones only support programable keys and SIP-T22P/T21P/T20P IP
phones only support line keys and programable keys.