Yealink SIP-T2XP - Page 173

Configuring Advanced Features
157
Procedure
BLF can be configured using the configuration files or locally.
Configuration File
<MAC>.cfg
Specify whether to use visual
alert and audio alert for BLF
pickup.
For more information, refer to
BLF on page 360.
y0000000000xx.cfg
Assign a BLF key.
For more information, refer to
BLF Key on page 429.
Configure BLF LED mode.
For more information, refer to
BLF on page 360.
Local
Web User Interface
Assign a BLF key.
Navigate to:
http://<phoneIPAddress>/servl
et?p=dsskey&q=load&model=
0
Specify whether to use visual
alert and audio alert for BLF
pickup.
Navigate to:
http://<phoneIPAddress>/servl
et?p=features-callpickup&q=lo
ad
Configure BLF LED mode.
Navigate to:
http://<phoneIPAddress>/servl
et?p=features-general&q=loa
d
Phone User Interface
Assign a BLF key.
To configure a BLF key via web user interface:
1. Click on DSSKey->Memory Key (or Line Key).
2. In the desired DSS key field, select BLF from the pull-down list of Type.
3. Enter the phone number or extension you want to monitor in the Value field.
4. Select the desired line from the pull-down list of Line.