Yealink SIP-T2XP - Page 296

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
280
Parameter-
auto_provision.repeat.enable
Configuration File
< y0000000000xx >.cfg
Description
Enables or disables the IP phone to check
new configuration repeatedly.
Format
Boolean
Default Value
0
Range
Valid values are:
0-Disabled
1-Enabled
Example
auto_provision.repeat.enable =0
Parameter-
auto_provision.repeat.minutes
Configuration File
< y0000000000xx >.cfg
Description
Configures the interval (in minutes) for the IP
phone to check new configuration.
Note: It works only if the parameter
“auto_provision.repeat.enable” is set to
1(Enabled).
Format
Integer
Default Value
1440
Range
1 to 43200
Example
auto_provision.repeat.minutes = 1000
Parameter-
auto_provision.weekly.enable
Configuration File
< y0000000000xx >.cfg
Description
Enables or disables the IP phone to check
new configuration weekly.
Format
Boolean
Default Value
0
Range
Valid values are:
0-Disabled
1-Enabled
Example
auto_provision.weekly.enable =0