Yealink SIP-T2XP - Page 298

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
282
3-Wednesday
4-Thursday
5-Friday
6-Saturday
Example
auto_provision.weekly.dayofweek =
0123456
Parameter-
phone_setting.common_power_l
ed_enable
Configuration File
<y0000000000xx>.cfg
Description
Enables or disables the power indicator LED
to be turned on.
Format
Boolean
Default Value
1
Range
Valid values are:
0-Disabled (power indicator LED is off)
1-Enabled (power indicator LED is solid
green)
Example
phone_setting.common_power_led_enable
= 1
Parameter-
phone_setting.ring_power_led_fl
ash_enable
Configuration File
<y0000000000xx>.cfg
Description
Enables or disables the power indicator LED
to flash when the phone receives an
incoming call.
If it is set to 0, the status of the power
indicator LED is determined by the value of
the parameter
“phone_setting.common_power_led_enable
”.
Format
Boolean
Default Value
1
Range
Valid values are: