Yealink SIP-T2XP - Page 304

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
288
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Boolean
Default Value
1
Range
Valid values are:
0-Disabled
1-Enabled
Example
wui.https_enable = 1
Parameter-
network.port.https
Configuration File
<y0000000000xx>.cfg
Description
Configures the HTTPS port used to access the
web user interface of the IP phone.
The default HTTPS port is 443.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Integer
Default Value
443
Range
1 to 65535
Example
network.port.https = 443
Parameter-
security.user_password
Configuration File
<y0000000000xx>.cfg
Description
Configures the password of the user for web
server access.
The IP phone uses “user” as the default user
password.
Note: IP phones support ASCII characters
32-126(0x20-0x7E) in passwords.
Format
username:new password
Default Value
user