Yealink SIP-T2XP - Page 303

Appendix
287
Example
phone_setting.backlight_time = 30
Parameter-
wui.http_enable
Configuration File
<y0000000000xx>.cfg
Description
Enables or disables the IP phone to access its
web user interface using HTTP protocol.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Boolean
Default Value
1
Range
Valid values are:
0-Disabled
1-Enabled
Example
wui.http_enable = 1
Parameter-
network.port.http
Configuration File
<y0000000000xx>.cfg
Description
Configures the HTTP port used to access the
web user interface of the IP phone.
The default HTTP port is 80.
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Integer
Default Value
80
Range
1 to 65535
Example
network.port.http = 80
Parameter-
wui.https_enable
Configuration File
<y0000000000xx>.cfg
Description
Enables or disables the IP phone to access its
web user interface using HTTPS protocol.