Yealink SIP-T2XP - Page 325

Appendix
309
number without having to press any key.
Format
Boolean
Default Value
0
Range
Valid values are:
0-Disabled
1-Enabled
Example
phone_setting.predial_autodial = 1
Parameter-
phone_setting.inter_digit_time
Configuration File
<y0000000000xx>.cfg
Description
Configures the time (in seconds) for the phone
to automatically dial out the entered digits
without pressing any other key.
Note: It works only if the parameter
“phone_setting.predial_autodial” is set to 1
(Enabled).
Format
Integer
Default Value
4
Range
1 to 14
Example
phone_setting.inter_digit_time = 4
Parameter-
call_waiting.enable
Configuration File
<y0000000000xx>.cfg
Description
Enables or disables call waiting feature.
If it is set to 0 (Disabled), a new incoming call
is automatically rejected by the IP phone with
a busy message while during a call.
If it is set to 1 (Enabled), the LCD screen will
present a new incoming call while during a
call.
Format
Boolean
Default Value
1
Range
Valid values are:
0-Disabled