Yealink SIP-T2XP - Page 327

Appendix
311
Range
String within 32 characters
Example
call_waiting.off_code = *73
Parameter-
auto_redial.enable
Configuration File
<y0000000000xx>.cfg
Description
Enables or disables the IP phone to
automatically redial the called number when it
is busy.
If it is set to 1 (Enabled), the IP phone will dial
the previous dialed out number automatically
when the dialed number is busy.
Format
Boolean
Default Value
0
Range
Valid values are:
0-Disabled
1-Enabled
Example
auto_redial.enable = 1
Parameter-
auto_redial.interval
Configuration File
<y0000000000xx>.cfg
Description
Configures the interval (in seconds) for the IP
phone to wait between redials.
The IP phone redials the dialed number at
regular intervals till the callee answers the
call.
Format
Integer
Default Value
10
Range
1 to 300
Example
auto_redial.interval = 10
Parameter-
auto_redial.times
Configuration File
<y0000000000xx>.cfg
Description
Configures the redial times for the IP phone.