Yealink SIP-T2XP - Page 328

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
312
The IP phone tries to redial the dialed number
as many times as configured till the callee
answers the call.
Format
Integer
Default Value
10
Range
1 to 300
Example
auto_redial.times = 10
Parameter-
account.X.auto_answer
Configuration File
<MAC>.cfg
Description
Enables or disables auto answer feature for
account X.
If it is set to 1 (Enabled), the IP phone can
automatically answer an incoming call.
X ranges from 1 to 6.
Note: The IP phone cannot automatically
answer the incoming call during a call even if
auto answer is enabled.
Format
Boolean
Default Value
0
Range
Valid values are:
0-Disabled
1-Enabled
Example
account.1.auto_answer = 1
Parameter-
features.auto_answer_delay
Configuration File
<y0000000000xx>.cfg
Description
Configures the delay time (in seconds)
before the phone automatically answers an
incoming call.
Format
Integer
Default Value
1
Range
1 to 4