Yealink SIP-T2XP - Page 329

Appendix
313
Example
features.auto_answer_delay = 1
Parameter-
features.call_completion_enable
Configuration File
<y0000000000xx>.cfg
Description
Enables or disables call completion feature.
If a user places a call and the callee is
temporarily not available to answer the call,
call completion feature allows notifying the
user when the callee becomes available to
receive a call.
If it is set to 1 (Enabled), the caller is notified
when the callee becomes available to
receive a call.
Format
Boolean
Default Value
0
Range
Valid values are:
0-Disabled
1-Enabled
Example
features.call_completion_enable = 1
Parameter-
account.X.anonymous_call
Configuration File
<MAC>.cfg
Description
Enables or disables anonymous call feature for
account X.
If it is set to 1 (Enabled), the IP phone will block
its identity from showing up to the callee when
placing a call. The callee’s phone LCD screen
presents anonymous instead of the caller’s
identity.
X ranges from 1 to 6.
Format
Boolean
Default Value
0