Yealink SIP-T2XP - Page 374

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
358
Parameter-
ldap.max_hits
Configuration File
<y0000000000xx>.cfg
Description
Configures the maximum number of search
results to be returned by the LDAP server. If
the value of the “Max.Hits” is blank, the
LDAP server will return all searched results.
Please note that a very large value of the
“Max. Hits” will slow down the LDAP search
speed, therefore it should be configured
according to the available bandwidth.
Note: It is not applicable to SIP-T19P and
SIP-T20P IP phones.
Format
Integer
Default Value
50
Range
1 to 32000
Example
ldap.max_hits = 50
Parameter-
ldap.name_attr
Configuration File
<y0000000000xx>.cfg
Description
Configures the name attributes of each
record to be returned by the LDAP server. It
compresses the search results. You can
configure multiple name attributes
separated by spaces.
Note: It is not applicable to SIP-T19P and
SIP-T20P IP phones.
Format
String
Default Value
Blank
Range
String within 99 characters
Example
ldap.name_attr = cn sn
Parameter-
ldap.numb_attr
Configuration File
<y0000000000xx>.cfg
Description
Configures the number attributes of each
record to be returned by the LDAP server. It
compresses the search results. You can
configure multiple number attributes