Yealink SIP-T2XP - Page 375

Appendix
359
separated by spaces.
Note: It is not applicable to SIP-T19P and
SIP-T20P IP phones.
Format
String
Default Value
Blank
Range
String within 99 characters
Example
ldap.numb_attr = telephoneNumber
Parameter-
ldap.display_name
Configuration File
<y0000000000xx>.cfg
Description
Configures the display name of the contact
record displayed on the LCD screen.
Note: It is not applicable to SIP-T19P and
SIP-T20P IP phones. The value must start with
“%” symbol.
Format
String
Default Value
Blank
Range
String within 99 characters
Example
ldap.display_name = %cn
The cn of the contact record is displayed on
the LCD screen.
Parameter-
ldap.version
Configuration File
<y0000000000xx>.cfg
Description
Configures the LDAP protocol version
supported by the IP phone. Make sure the
protocol value corresponds with the version
assigned on the LDAP server.
Note: It is not applicable to SIP-T19P and
SIP-T20P IP phones.
Format
Integer
Default Value
3
Range
2 or 3
Example
ldap.version = 3