Yealink SIP-T2XP - Page 381

Appendix
365
Note: It works only if the parameters
“account.X.subscribe_mwi” is set to 1
(Enabled) and “voice_mail.number.X” is
configured.
Format
Boolean
Default Value
0
Value
Valid values are:
0-Disabled
1-Enabled
Example
account.1.subscribe_mwi_to_vm = 0
Parameter-
multicast.codec
Configuration File
<y0000000000xx>.cfg
Description
Configures a multicast codec for the IP
phone to use to send an RTP stream.
Note: It is not applicable to SIP-T19P IP
phones.
Format
string
Default Value
G722
Range
Valid values are:
 PCMU
 PCMA
 G729
 G722
 G726-16 (not applicable to SIP-T21P)
 G726-24 (not applicable to SIP-T21P)
 G726-32
 G726-40 (not applicable to SIP-T21P)
 G723_53
Example
multicast.codec = G722