EasyManua.ls Logo

Yealink SIP-T2XP - Page 395

Yealink SIP-T2XP
506 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix
379
Parameter-
network.vpn_enable
Configuration File
<y0000000000xx>.cfg
Description
Enables or disables VPN feature on the IP
phone.
Note: It is not applicable to SIP-T19P IP
phones. If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Boolean
Default Value
0
Range
Valid values are:
0-Disabled
1-Enabled
Example
network.vpn_enable = 1
Parameter-
openvpn.url
Configuration File
<y0000000000xx>.cfg
Description
Configures the access URL of the OpenVPN
TAR package.
Note: It is not applicable to SIP-T19P IP
phones.
Format
URL
Default Value
Blank
Range
String within 511 characters
Example
openvpn.url =
http://192.168.10.25/OpenVPN.tar
Parameter-
network.qos.rtptos
Configuration File
<y0000000000xx>.cfg
Description
Configures the DSCP for voice packets.
The default DSCP value for RTP packets is
46 (Expedited Forwarding).

Table of Contents

Other manuals for Yealink SIP-T2XP

Related product manuals