Yealink SIP-T2XP - Page 396

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
380
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Integer
Default Value
46
Range
0 to 63
Example
network.qos.rtptos = 46
Parameter-
network.qos.signaltos
Configuration File
<y0000000000xx>.cfg
Description
Configures the DSCP for SIP packets.
The default DSCP value for SIP packets is 26
(Assured Forwarding).
Note: If you change this parameter, the IP
phone will reboot to make the change take
effect.
Format
Integer
Default Value
26
Range
0 to 63
Example
network.qos.signaltos = 26
Parameter-
account.X.nat.nat_traversal
Configuration File
<MAC>.cfg
Description
Enables or disables the NAT traversal for
account X.
X ranges from 1 to 6.
Format
Boolean
Default Value
0
Range
Valid values are:
0-Disabled
1-Enabled
Example
account.1.nat.nat_traversal = 0