Yealink SIP-T2XP - Page 402

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
386
Example
managementserver.periodic_inform_ena
ble = 1
Parameter-
managementserver.periodic_infor
m_interval
Configuration File
<y0000000000xx>.cfg
Description
Configures the interval (in seconds) to
report its configuration information to the
ACS.
Format
Integer
Default Value
60
Range
5 to 4294967295
Example
managementserver.periodic_inform_inte
rval = 60
Parameter-
network.ip_address_mode
Configuration File
<MAC>.cfg
Description
Configures the IP address mode.
Note: If you change this parameter, the IP
phone will reboot to make the change
take effect.
Format
Integer
Default Value
0
Range
Valid values are:
0-IPv4
1-IPv6
2-IPv4&IPv6
Example
network.ip_address_mode = 1
Parameter-
network.ipv6_internet_port.type
Configuration File
<MAC>.cfg
Description
Configures the IPv6 address assignment
method.
Note: If you change this parameter, the IP