Yealink SIP-T2XP

Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
66
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-audio&q=load
Phone User Interface
Configure the send key.
To configure a send key via web user interface:
1. Click on Features->General Information.
2. Select the desired value from the pull-down list of Key As Send.
3. Click Confirm to accept the change.
To configure a send sound and key tone via web user interface:
1. Click on Features->Audio.
2. Select the desired value from the pull-down list of Key Sound.