Yealink SIP-T2XP - Page 89

Configuring Basic Features
73
3. Enter the desired line ID in the Account field or leave it blank.
If you leave this field blank or enter 0, the area code rule will apply to all accounts
on the IP phone.
4. Click Confirm to accept the change.
Block out rule prevents users from dialing out specific numbers. When entered numbers
match the predefined block out rule, the LCD screen prompts “Forbidden Number”. IP
phones support up to 10 block out rules.
Procedure
Block out rule can be created using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Create the block out rule for the
IP phone.
For more information, refer to Dial
Plan on page 302.
Local
Web User Interface
Create the block out rule for the
desired line.
Navigate to:
http://<phoneIPAddress>/servlet
?p=settings-blackout&q=load
To create a block out rule via web user interface:
1. Click on Settings->Dial Plan->Block Out.
2. Enter the desired value in the BlockOut Number field.