Administrator’s Guide for SIP-T2xP and SIP-T19P IP Phones
74
3. Enter the desired line ID in the Account field or leave it blank.
If you leave this field blank or enter 0, the block out rule will apply to all accounts on
the IP phone.
4. Click Confirm to add the block out rule.
Hotline is a point-to-point communication link in which a call is automatically directed to
the preset hotline number. The IP phone automatically dials out the hotline number using
the first available line after a specified time interval when off-hook. IP phones only
support one hotline number.
Procedure
Hotline can be configured using the configuration files or locally.
Configure the hotline number.
Specify the time (in seconds) the
IP phone waits before
automatically dialing out the
hotline number.
For more information, refer to Key
as Send on page 301.
Configure the hotline number.
Specify the time (in seconds) the
IP phone waits before
automatically dial out the hotline
number.
Navigate to:
http://<phoneIPAddress>/servlet
To Next Page
Loading...
Need help?
General