Yealink SIP-T40G Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
157
Sending Volume Configuration
You can configure the sending volume of currently engaged audio devices (handset, speakerphone or headset)
when the phone is in use.
The following table lists the parameters you can use to configure the sending volume.
Parameter
voice.handfree_send
[1]
<y0000000000xx>.cfg
Description
It configures the sending volume of the speaker.
Note: We recommend that you modify this parameter cautiously. An unsuitable value may render the
voice quality bad.
Permitted
Values
Integer from -50 to 50
Default
0
Web UI
Features > Audio > Handfree Send Volume (-50~50)
Parameter
voice.handfree.autoreset_spk_vol <y0000000000xx>.cfg
Description
It configures the speaker's volume level during a call.
Permitted
Values
0-The speakerphone volume at the end of a call persists between calls.
1 to 15-The speakerphone volume does not persist between calls, and resets to this specified level
each new call.
Default
0
Parameter
voice.handset_send
[1]
<y0000000000xx>.cfg
Description
It configures the sending volume of the handset.
Note: We recommend that you modify this parameter cautiously. An unsuitable value may render the
voice quality bad.
Permitted
Values
Integer from -50 to 50
Default
0
Supported
Devices
All phones except CP920
Web UI
Features > Audio > Handset Send Volume (-50~50)
Parameter
voice.handset.autoreset_spk_vol <y0000000000xx>.cfg
Description
It configures the handset's volume level during a call.
Permitted
Values
0-The handset volume at the end of a call persists between calls.
1 to 15-The handset volume does not persist between calls, and resets to this specified level each
new call.
Default
0
Supported
Devices
All phones except CP920
Parameter
voice.headset_send
[1]
<y0000000000xx>.cfg
Description
It configures the sending volume of the headset.
Note: We recommend that you modify this parameter cautiously. An unsuitable value may render the
voice quality bad.

Yealink SIP-T40G Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Wall mountable	Yes
Wi-Fi	No
Security algorithms	AES, HTTPS, SSL/TLS
Networking standards	IEEE 802.3af
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	FTP, TFTP, HTTP, HTTPS
Voice codecs	G.711, G.711a, G.711u, G.722, G.726, G.729ab
RJ-11 ports quantity	1
Ethernet LAN (RJ-45) ports	2
AC adapter input voltage	100 - 240 V
AC adapter output current	0.6 A
AC adapter output voltage	5 V
Power consumption (typical)	1.6 W
Certification	CE, FCC, ISO 9001
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 90 %
Volume control	Digital
Display diagonal	2.3 \
Display resolution	132 x 64 pixels
Lines quantity	3 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	175 mm
Width	212 mm
Height	54 mm