EasyManuals Logo

Yealink SIP-T40G Administrator's Guide

Yealink SIP-T40G
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #300 background imageLoading...
Page #300 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
297
Web UI
Account > Register > Label
Phone UI
Menu > Settings > Advanced Settings (default password: admin) > Accounts > Label
[1]
X is the PSTN account ID. X= 1 to 2.
Registration Settings Configuration
The following table lists the parameters you can use to change the registration settings.
Parameter
account.X.enable_user_equal_phone
[1]
<MAC>.cfg
Description
It enables or disables the phone to add “user=phone to the SIP header of the INVITE message.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Account > Advanced > Send user=phone
Parameter
account.X.register_mac
[1]
<MAC>.cfg
Description
It enables or disables the phone to add MAC address to the SIP header of the REGISTER message.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Account > Advanced > SIP Send MAC
Parameter
account.X.register_line
[1]
<MAC>.cfg
Description
It enables or disables the phone to add a line number to the SIP header of the REGISTER message.
For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G: 0~15 stand for line1~line16;
For T53W/T53/T43U/T42U/T42S/T42G: 0~11 stand for line1~line12;
For T41P/T41S/T27G: 0~5 stand for line1~line6;
For T40P/T40G/T23P/T23G: 0~2 stand for line1~line3;
For T21(P) E2: 0~1 stand for line1~line2;
For T19(P) E2/CP920: 0 stands for line1.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Account > Advanced > SIP Send Line
Parameter
account.X.contact_take_line_param
[1]
<MAC>.cfg
Description
It enables or disables the phone to carry the line parameter in the Contact header of the Register mes-
sage.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
account.X.unregister_on_reboot
[1]
<MAC>.cfg

Table of Contents

Other manuals for Yealink SIP-T40G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T40G and is the answer not in the manual?

Yealink SIP-T40G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Wall mountableYes
Wi-FiNo
Security algorithmsAES, HTTPS, SSL/TLS
Networking standardsIEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP, TFTP, HTTP, HTTPS
Voice codecsG.711, G.711a, G.711u, G.722, G.726, G.729ab
RJ-11 ports quantity1
Ethernet LAN (RJ-45) ports2
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
AC adapter output voltage5 V
Power consumption (typical)1.6 W
CertificationCE, FCC, ISO 9001
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 90 %
Volume controlDigital
Display diagonal2.3 \
Display resolution132 x 64 pixels
Lines quantity3 lines
Phonebook capacity1000 entries
Number of VoIP accounts3
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth175 mm
Width212 mm
Height54 mm

Related product manuals