EasyManuals Logo

Yealink SIP-T40G Administrator's Guide

Yealink SIP-T40G
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #273 background imageLoading...
Page #273 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
270
Values
Default
Blank (no prompt for entering the unlock password)
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Dsskey Page Reset Configuration
The following table lists the parameter you can use to configure reset dsskey page.
Parameter
features.dsskey_page_reset.call_estab-
lished.enable
<y0000000000xx>.cfg
Description
It enables or disables the phone to automatically switch to a specified dsskey page when a call is
established.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
T54W, T53W, T53, T46U, T46S, T43U, T42S, T42U, T41S, T27G
Parameter
features.dsskey_page_reset.call_established.page <y0000000000xx>.cfg
Description
It controls which dsskey page the phone automatically switches to when a call is established.
Note: It works only if "features.dsskey_page_reset.call_established.enable" is set to 1 (Enabled).
Permitted
Values
Integer from 1 to 3
Default
1
Supported
Devices
T54W, T53W, T53, T46U, T46S, T43U, T42S, T42U, T41S, T27G
Parameter
features.dsskey_page_reset.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to automatically switch to a specified dsskey page when all calls end.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
T54W, T53W, T53, T46U, T46S, T43U, T42S, T42U, T41S, T27G
Parameter
features.dsskey_page_reset.page <y0000000000xx>.cfg
Description
It controls which dsskey page the phone automatically switches to when all calls end.
Note: It works only if "features.dsskey_page_reset.enable" is set to 1 (Enabled).
Permitted
Values
Integer from 1 to 3
Default
1
Supported
Devices
T54W, T53W, T53, T46U, T46S, T43U, T42S, T42U, T41S, T27G
Enhanced DSS Keys
Enhanced DSS Keys (EDK) enables users to customize the functions of the phone’s DSS keys.

Table of Contents

Other manuals for Yealink SIP-T40G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T40G and is the answer not in the manual?

Yealink SIP-T40G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Wall mountableYes
Wi-FiNo
Security algorithmsAES, HTTPS, SSL/TLS
Networking standardsIEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP, TFTP, HTTP, HTTPS
Voice codecsG.711, G.711a, G.711u, G.722, G.726, G.729ab
RJ-11 ports quantity1
Ethernet LAN (RJ-45) ports2
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
AC adapter output voltage5 V
Power consumption (typical)1.6 W
CertificationCE, FCC, ISO 9001
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 90 %
Volume controlDigital
Display diagonal2.3 \
Display resolution132 x 64 pixels
Lines quantity3 lines
Phonebook capacity1000 entries
Number of VoIP accounts3
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth175 mm
Width212 mm
Height54 mm

Related product manuals