Yealink SIP-T40G Administrator's Guide

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
461
Description
It enables or disables the phone to answer an incoming intercom call while there is already an active
call on the IP phone.
Note: It works only if “features.intercom.allow” and "call_waiting.enable" are set to 1 (Enabled) and
“phone_setting.call_appearance.calls_per_linekey” is greater than 1.
Permitted
Values
0-Disabled
1-Enabled, the phone will automatically answer the intercom call and place the active call on hold.
Default
0
Web UI
Features > Intercom > Intercom Barge
Phone UI
Menu > Features > Intercom > Intercom Barge
Parameter
features.intercom.barge_in_dialing.enable <y0000000000xx>.cfg
Description
It enables or disables the intercom call to answer an incoming intercom call while dialing.
Note: It works only if “features.intercom.barge” is set to 0 (Disabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Parameter
features.intercom.headset_prior.enable <y0000000000xx>.cfg
Description
It configures the channel mode to use when receiving an incoming intercom call.
Permitted
Values
0-Speaker Mode
1-Headset Mode, it works only if you connect the headset to the IP phone and the headset mode is
activated for use.
Default
1
Supported
Devices
All phones except CP920
Parameter
account.X.alert_info
[1]
<MAC>.cfg
Description
It configures the value of the Alert-Info header for intercom feature.
The value format likes: <sip:XXX (X can be any value)>; answer-after=0.
Note: If both Call-Info header (defined by the parameter "account.X.call_info") and Alert-Info header
are configured, the Call-Info header has a higher priority than the Alert-Info header.
Permitted
Values
String within 256 characters
Default
Blank
[1]
X is the account ID. For T57W/T54W/T48U/T48S/T48G/T46U/T46S/T46G/T29G, X=1-16; for
T53W/T53/T43U/T42G/T42U/T42S, X=1-12; for T41P/T41S/T27G, X=1-6; for T40P/T40G/T23P/T23G, X=1-3; for T21
(P) E2, X=1-2; for T19(P) E2/CP920, X=1.
CSTA Control
User Agent Computer Supported Telecommunications Applications (uaCSTA) is explained in detail in Using CSTA
for SIP Phone User Agents (uaCSTA) and Services for Computer Supported Telecommunications Applications
Phase III.

Yealink SIP-T40G Specifications

General

Mounting	Desk/Wall
Handset type	Wired handset
Product type	IP Phone
Product color	Black
Wall mountable	Yes
Wi-Fi	No
Security algorithms	AES, HTTPS, SSL/TLS
Networking standards	IEEE 802.3af
Ethernet LAN interface type	Gigabit Ethernet
Supported network protocols	FTP, TFTP, HTTP, HTTPS
Voice codecs	G.711, G.711a, G.711u, G.722, G.726, G.729ab
RJ-11 ports quantity	1
Ethernet LAN (RJ-45) ports	2
AC adapter input voltage	100 - 240 V
AC adapter output current	0.6 A
AC adapter output voltage	5 V
Power consumption (typical)	1.6 W
Certification	CE, FCC, ISO 9001
Operating temperature (T-T)	-10 - 50 °C
Operating relative humidity (H-H)	10 - 90 %
Volume control	Digital
Display diagonal	2.3 \
Display resolution	132 x 64 pixels
Lines quantity	3 lines
Phonebook capacity	1000 entries
Number of VoIP accounts	3
Number of handles included	1 pc(s)

Weight and Dimensions

Depth	175 mm
Width	212 mm
Height	54 mm