Yealink SIP-T40G

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
189
Values 1-Enabled
Default
1
Web UI
Settings > Voice Monitoring > Report Options on Phone > Packets Lost
Parameter
phone_setting.vq_rtcpxr_display_symm_oneway_delay.en-
able
<y0000000000xx>.cfg
Description
It enables or disables the phone to display SymmOneWayDelay on the phone screen.
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Settings > Voice Monitoring > Report Options on Phone > SymmOneWayDelay
Parameter
phone_setting.vq_rtcpxr_display_round_trip_delay.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display RoundTripDelay on the phone screen.
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Web UI
Settings > Voice Monitoring > Report Options on Phone > RoundTripDelay
Parameter
phone_setting.vq_rtcpxr_display_moslq.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display MOS-LQ on the phone screen.
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Settings > Voice Monitoring > Report Options on Phone > MOS-LQ
Parameter
phone_setting.vq_rtcpxr_display_moscq.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display MOS-CQ on the phone screen.
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Web UI
Settings > Voice Monitoring > Report Options on Phone > MOS-CQ
Central Report Collector
To operate with the central report collector, the phones must be configured to forward their voice quality reports to
the specified report collector. You can specify the report collector on a per-line basis.
Topic
Central Report Collector Configuration