EasyManuals Logo

Yealink SIP-T40G Administrator's Guide

Yealink SIP-T40G
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #280 background imageLoading...
Page #280 background image
Phone Customization
277
Parameter
edk.edkprompt.X.label
[1]
<y0000000000xx>.cfg
Description
It configures the text string used as a label of the user input prompt X.
If it is left blank, Default is displayed.
Example:
edk.edkprompt.1.label = Enter Password
Note: It works only if “features.enhanced_dss_keys.enable” and “edk.edkprompt.X.enable are set to
1 (Enabled).
Permitted
Values
String
Default
Default
Parameter
edk.edkprompt.X.type
[1]
<y0000000000xx>.cfg
Description
It configures the type of characters entered by the user for user input prompt X.
If it is set to numeric, the default input method is 123, and you can switch among abc/ABC/2aB input
methods.
If it is set to text, the default input method is abc, and you can switch among ABC/2aB/123 input meth-
ods.
Note: It works only if “features.enhanced_dss_keys.enable” and “edk.edkprompt.X.enable are set to
1 (Enabled).
Permitted
Values
text or numeric
Default
text
Parameter
edk.edkprompt.X.userfeedback
[1]
<y0000000000xx>.cfg
Description
It configures the user input feedback method for user input prompt X.
Note: It works only if “features.enhanced_dss_keys.enable” and “edk.edkprompt.X.enable are set to
1 (Enabled).
Permitted
Values
visible-the entered text is visible.
masked-the entered text is displayed as asterisk characters “*”. It can be used to mask password
fields.
Default
visible
Parameter
edk.edkprompt.X.title
[1]
<y0000000000xx>.cfg
Description
It configures the text string used as a title for the user input prompt X. The title appears at the top of the
user input prompt screen.
If it is left blank, the EDK Prompt is displayed.
Note: It works only if “features.enhanced_dss_keys.enable” and “edk.edkprompt.X.enable are set to
1 (Enabled).
Permitted
Values
String
Default
EDK Prompt
Supported
Devices
All phones except T57W, T48U, T48S, T48G, T46G, T42G, T41P, T29G
[1]
X is the prompt ID. X=1-10.

Table of Contents

Other manuals for Yealink SIP-T40G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T40G and is the answer not in the manual?

Yealink SIP-T40G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Wall mountableYes
Wi-FiNo
Security algorithmsAES, HTTPS, SSL/TLS
Networking standardsIEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP, TFTP, HTTP, HTTPS
Voice codecsG.711, G.711a, G.711u, G.722, G.726, G.729ab
RJ-11 ports quantity1
Ethernet LAN (RJ-45) ports2
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
AC adapter output voltage5 V
Power consumption (typical)1.6 W
CertificationCE, FCC, ISO 9001
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 90 %
Volume controlDigital
Display diagonal2.3 \
Display resolution132 x 64 pixels
Lines quantity3 lines
Phonebook capacity1000 entries
Number of VoIP accounts3
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth175 mm
Width212 mm
Height54 mm

Related product manuals