EasyManuals Logo

Yealink SIP-T40G Administrator's Guide

Yealink SIP-T40G
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
28
Other Phones:
Network > Basic > IPv6 Config
Phone UI
Color Screen Phones:
Menu > Advanced (default password: admin) > Network > WAN Port > IPv6
Black-and-white Screen Phones:
Menu > Settings > Advanced Settings (default password: admin) > Network > WAN Port > IPv6
Parameter
static.network.ipv6_internet_port.ip
[1]
<y0000000000xx>.cfg
Description
It configures the IPv6 address for the wired network.
Note: It works only if “static.network.ip_address_mode is set to 1 (IPv6) or 2 (IPv4 & IPv6), and "stat-
ic.network.ipv6_internet_port.type" is set to 1 (Static IP).
Permitted
Values
IPv6 Address
Default
Blank
Web UI
T57W/T54W/T53W/T53/T48U/T46U/T43U/T42U:
Network > Basic > IPv6 Config > Configuration Type (Static IP) > IP Address
Other Phones:
Network > Basic > IPv6 Config > Static IP Address > IP Address
Phone UI
Color Screen Phones:
Menu > Advanced (default password: admin) > Network > WAN Port > IPv6 > Static IP > IP Address
Black-and-white Screen Phones:
Menu > Settings > Advanced Settings (default password: admin) > Network > WAN Port > IPv6 >
Static IPv6 Client > IP Address
Parameter
static.network.ipv6_prefix
[1]
<y0000000000xx>.cfg
Description
It configures the IPv6 prefix for the wired network.
Note: It works only if “static.network.ip_address_mode is set to 1 (IPv6) or 2 (IPv4 & IPv6), and "stat-
ic.network.ipv6_internet_port.type" is set to 1 (Static IP).
Permitted
Values
Integer from 0 to 128
Default
64
Web UI
T57W/T54W/T53W/T53/T48U/T46U/T43U/T42U:
Network > Basic > IPv6 Config > Configuration Type (Static IP) > IPv6 Prefix(0~128)
Other Phones:
Network > Basic > IPv6 Config > Static IP Address > IPv6 Prefix(0~128)
Phone UI
Color Screen Phones:
Menu > Advanced (default password: admin) > Network > WAN Port > IPv6 > Static IP > IPv6 IP Prefix
Black-and-white Screen Phones:
Menu > Settings > Advanced Settings (default password: admin) > Network > WAN Port > IPv6 >
Static IPv6 Client > IPv6 IP Prefix
Parameter
static.network.ipv6_internet_port.gateway
[1]
<y0000000000xx>.cfg
Description
It configures the IPv6 default gateway for the wired network.

Table of Contents

Other manuals for Yealink SIP-T40G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T40G and is the answer not in the manual?

Yealink SIP-T40G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Wall mountableYes
Wi-FiNo
Security algorithmsAES, HTTPS, SSL/TLS
Networking standardsIEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP, TFTP, HTTP, HTTPS
Voice codecsG.711, G.711a, G.711u, G.722, G.726, G.729ab
RJ-11 ports quantity1
Ethernet LAN (RJ-45) ports2
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
AC adapter output voltage5 V
Power consumption (typical)1.6 W
CertificationCE, FCC, ISO 9001
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 90 %
Volume controlDigital
Display diagonal2.3 \
Display resolution132 x 64 pixels
Lines quantity3 lines
Phonebook capacity1000 entries
Number of VoIP accounts3
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth175 mm
Width212 mm
Height54 mm

Related product manuals