EasyManuals Logo

Yealink SIP-T40G Administrator's Guide

Yealink SIP-T40G
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #313 background imageLoading...
Page #313 background image
Account Settings
310
When priorities are equal, weight is used to differentiate the preference. Higher weight is more pre-
ferred.
Permitted
Values
Integer from 0 to 65535
Default
0
Parameter
dns_cache_srv.X.ttl
[2]
<y0000000000xx>.cfg
Description
It configures the time interval (in seconds) that SRV record X may be cached before the record should
be consulted again.
Permitted
Values
Integer from 30 to 2147483647
Default
300
Parameter
dns_cache_a.X.name
[2]
<y0000000000xx>.cfg
Description
It configures the domain name in A record X.
Permitted
Values
Domain name
Default
Blank
Parameter
dns_cache_a.X.ip
[2]
<y0000000000xx>.cfg
Description
It configures the IP address that the domain name in A record X maps to.
Permitted
Values
IP address
Default
Blank
Parameter
dns_cache_a.X.ttl
[2]
<y0000000000xx>.cfg
Description
It configures the time interval (in seconds) that A record X may be cached before the record should be
consulted again.
Permitted
Values
Integer from 30 to 2147483647
Default
300
Parameter
static.network.dns.ttl_enable
[3]
<y0000000000xx>.cfg
Description
It enables or disables the phone to use TTL (Time To Live) in the A record.
Permitted
Values
0-Disabled
1-Enabled
Default
1
Parameter
static.network.dns.last_cache_expired <y0000000000xx>.cfg
Description
It configures the validity period of the expired DNS cache.
Note: It works only if "static.network.dns.last_cache_expired.enable" is set to 1 (Enabled).
Permitted
Values
Integer from 0 to 65535
0-the expired DNS cache can only be used once. After using, the phone will perform a DNS query
again.
1 to 65535-the phone will use the expired DNS cache during the specified period. After that, the
phone will perform a DNS query again.

Table of Contents

Other manuals for Yealink SIP-T40G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T40G and is the answer not in the manual?

Yealink SIP-T40G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Wall mountableYes
Wi-FiNo
Security algorithmsAES, HTTPS, SSL/TLS
Networking standardsIEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP, TFTP, HTTP, HTTPS
Voice codecsG.711, G.711a, G.711u, G.722, G.726, G.729ab
RJ-11 ports quantity1
Ethernet LAN (RJ-45) ports2
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
AC adapter output voltage5 V
Power consumption (typical)1.6 W
CertificationCE, FCC, ISO 9001
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 90 %
Volume controlDigital
Display diagonal2.3 \
Display resolution132 x 64 pixels
Lines quantity3 lines
Phonebook capacity1000 entries
Number of VoIP accounts3
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth175 mm
Width212 mm
Height54 mm

Related product manuals