EasyManuals Logo

Yealink SIP-T40G Administrator's Guide

Yealink SIP-T40G
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #315 background imageLoading...
Page #315 background image
Account Settings
312
tup when there is no registered account.
Note: It works only if “phone_setting.logon_wizard is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Supported
Devices
All phones except CP920
Parameter
hotdesking.startup_password_enable <y0000000000xx>.cfg
Description
It enables or disables the phone to provide an input field of password on the logon wizard after startup
when there is no registered account.
Note: It works only if “phone_setting.logon_wizard is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
1
Supported
Devices
All phones except CP920
Parameter
hotdesking.startup_sip_server_enable <y0000000000xx>.cfg
Description
It enables or disables the phone to provide an input field of SIP server on the logon wizard after star-
tup when there is no registered account.
Note: It works only if “phone_setting.logon_wizard is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
All phones except CP920
Parameter
hotdesking.startup_outbound_enable <y0000000000xx>.cfg
Description
It enables or disables the phone to provide an input field of the outbound server on the logon wizard
after startup when there is no registered account.
Note: It works only if “phone_setting.logon_wizard is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
All phones except CP920
Parameter
phone_setting.logon_wizard_forever_wait <y0000000000xx>.cfg
Description
It enables or disables the phone to remain at the hot desking logon wizard even though timeout.
Permitted
Values
0-Disabled
1-Enabled
Default
0
Supported
Devices
All phones except CP920

Table of Contents

Other manuals for Yealink SIP-T40G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T40G and is the answer not in the manual?

Yealink SIP-T40G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Wall mountableYes
Wi-FiNo
Security algorithmsAES, HTTPS, SSL/TLS
Networking standardsIEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP, TFTP, HTTP, HTTPS
Voice codecsG.711, G.711a, G.711u, G.722, G.726, G.729ab
RJ-11 ports quantity1
Ethernet LAN (RJ-45) ports2
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
AC adapter output voltage5 V
Power consumption (typical)1.6 W
CertificationCE, FCC, ISO 9001
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 90 %
Volume controlDigital
Display diagonal2.3 \
Display resolution132 x 64 pixels
Lines quantity3 lines
Phonebook capacity1000 entries
Number of VoIP accounts3
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth175 mm
Width212 mm
Height54 mm

Related product manuals