EasyManuals Logo

Yealink SIP-T40G Administrator's Guide

Yealink SIP-T40G
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #481 background imageLoading...
Page #481 background image
Advanced Features
478
Variable Value Phone Action
Cancel/CANCEL Cancel actions, reject incoming calls or end a call.
X
Cancel actions, reject incoming calls or mute or un-mute calls. (not
applicable to T57W phones)
0-9/*/POUND Press the keypad (0-9, * or #).
L1-LX
Press the line keys (for T57W/T48U/T48S/T48G, X=29; for
T54W/T46U/T46S/T46G/T29G, X=27; for
T42U/T42G/T42S/T41P/T41S, X=15; for T53W/T53/T43U/T27G,
X=21; for T40P/T40G/T23P/T23G, X=3; for T21(P) E2, X=2).
LX_LONGPRESS
[1]
Perform a corresponding action when long pressing line key X.
BACK_IDLE Return idle screen directly.
F1-F4 Press the soft keys.
MSG Press the MESSAGE key. (not applicable to CP920 phones)
HEADSET Press the HEADSET key. (not applicable to CP920 phones)
RD Press the RD/Redial key (not applicable to CP920 phones).
UP/DOWN/LEFT/RIGHT Press the navigation keys. (not applicable to T57W phones)
Reboot Reboot the phone.
AutoP Perform auto provisioning.
DNDOn
Activate the DND feature.
Note: It works only if “features.dnd.allow is set to 1 (Enabled).
DNDOff
Deactivate the DND feature.
Note: It works only if “features.dnd.allow is set to 1 (Enabled).
number=xxx&outgoing_uri=y
Place a call to xxx from SIP URI y.
Example: http://10.3.20.10/servlet?key=number=1234&outgoing_uri-
i=1006@10.2.1.48 (1234 means the number you dial out;
1006@10.2.1.48 means the SIP URL you dial from.)
OFFHOOK
Pick up the handset. (not applicable to CP920 phones)
Press the off-hook key. (only applicable to CP920 phones)
ONHOOK
Hang up the handset (not applicable to CP920 phones).
Press the on-hook key. (only applicable to CP920 phones)
ANSWER/ASW/Asw Answer a call.
Reset Reset a phone.
ATrans=xxx Perform a semi-attended/attended transfer to xxx.
ATrans=callid_A@callid_B
Join any two call parties together on the phone using the call-id. After
the call is set up, the two parties disconnect with the phone.
Scene:

Table of Contents

Other manuals for Yealink SIP-T40G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T40G and is the answer not in the manual?

Yealink SIP-T40G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Wall mountableYes
Wi-FiNo
Security algorithmsAES, HTTPS, SSL/TLS
Networking standardsIEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP, TFTP, HTTP, HTTPS
Voice codecsG.711, G.711a, G.711u, G.722, G.726, G.729ab
RJ-11 ports quantity1
Ethernet LAN (RJ-45) ports2
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
AC adapter output voltage5 V
Power consumption (typical)1.6 W
CertificationCE, FCC, ISO 9001
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 90 %
Volume controlDigital
Display diagonal2.3 \
Display resolution132 x 64 pixels
Lines quantity3 lines
Phonebook capacity1000 entries
Number of VoIP accounts3
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth175 mm
Width212 mm
Height54 mm

Related product manuals