EasyManuals Logo

Yealink SIP-T40G Administrator's Guide

Yealink SIP-T40G
572 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #515 background imageLoading...
Page #515 background image
Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
512
Permitted
Values
String within 99 characters
Default
Blank
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Parameter
bw.virtual_user.1.xsi.password <MAC>.cfg
Description
It configures the password of virtual account for XSI access authentication.
Note: It works only if “bw.xsi.enable is set to 1 (Enabled) and it is required only when “sip.au-
thentication_for_xsi is set to 0 (User Login Credentials for XSI Authentication).
Permitted
Values
String within 99 characters
Default
Blank
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Parameter
bw.virtual_user.1.xsi.host <MAC>.cfg
Description
It configures the IP address of the Xtended Services Platform server for the virtual account.
Note: It works only if “bw.xsi.enable is set to 1 (Enabled).
Permitted
Values
IP address or domain name
Default
Blank
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Parameter
bw.virtual_user.1.xsi.server_type <MAC>.cfg
Description
It configures the access protocol of the Xtended Services Platform server for the virtual account.
Note: It works only if “bw.xsi.enable is set to 1 (Enabled).
Permitted
Values
HTTP or HTTPS
Default
Blank
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Parameter
bw.virtual_user.1.xsi.port <MAC>.cfg
Description
It configures the port of the Xtended Services Platform server for the virtual account.
Note: It works only if “bw.xsi.enable is set to 1 (Enabled).
Permitted
Values
Integer from 1 to 65535
Default
80
Supported
Devices
All phones except T48G, T46G, T42G, T41P and T29G
Parameter
account.X.bw_disp_code.Y
[1][2]
<MAC>.cfg
Description
It configures the disposition code which must match one of the codes configured on BroadWorks.
Permitted
Values
Integer from 1 to 2147483647

Table of Contents

Other manuals for Yealink SIP-T40G

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Yealink SIP-T40G and is the answer not in the manual?

Yealink SIP-T40G Specifications

General IconGeneral
MountingDesk/Wall
Handset typeWired handset
Product typeIP Phone
Product colorBlack
Wall mountableYes
Wi-FiNo
Security algorithmsAES, HTTPS, SSL/TLS
Networking standardsIEEE 802.3af
Ethernet LAN interface typeGigabit Ethernet
Supported network protocolsFTP, TFTP, HTTP, HTTPS
Voice codecsG.711, G.711a, G.711u, G.722, G.726, G.729ab
RJ-11 ports quantity1
Ethernet LAN (RJ-45) ports2
AC adapter input voltage100 - 240 V
AC adapter output current0.6 A
AC adapter output voltage5 V
Power consumption (typical)1.6 W
CertificationCE, FCC, ISO 9001
Operating temperature (T-T)-10 - 50 °C
Operating relative humidity (H-H)10 - 90 %
Volume controlDigital
Display diagonal2.3 \
Display resolution132 x 64 pixels
Lines quantity3 lines
Phonebook capacity1000 entries
Number of VoIP accounts3
Number of handles included1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Depth175 mm
Width212 mm
Height54 mm

Related product manuals